 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PSPT65 Series Triple Output Up to 68 Watts AC/DC Power Supply FEATURES * 2 Year Warranty * 100% Full Load Burn-In Test * Universal AC Input/ Full Range * Low Leakage Current < 0.75mA * Cooling by Free Air Convection * Fixed Switching Frequency at 65KHz * Short Circuit, Overload, and Over Voltage Protected SPECIFICATIONS: PSPT65 Series All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage 90 - 264VAC (127 - 370VDC) Input Frequency 47 ~ 440Hz AC Current (typical) 1.5A @ 115VAC 0.9A @ 230VAC Inrush Current 20A @ 115VAC cold start 40A @ 230VAC cold start. Leakage Current < 0.75mA OUTPUT SPECIFICATIONS Output Voltage See Table PSPT-65A,B,C: CH 1: 4% CH.2: 7% CH 3: 5% Voltage Tolerance (See Note 3) PSPT-65D: CH 1: 4% CH.2: 6% CH 3: 6% Voltage Adjustment Range CH1: 4.75 ~ 5.5V Output Power (max) Rated output power for convection; 72W with 18CFM min. forced air. PSPT-65A,B,C: CH 1: 1% CH.2: 2% CH 3: 1% Line Regulation PSPT-65D: CH 1: 1% CH.2: 2% CH 3: 3% PSPT-65A,B,C: CH 1: 3% CH.2: 4% CH 3: 1% Load Regulation PSPT-65D: CH 1: 2% CH.2: 5% CH 3: 5% Output Current See Table Ripple & Noise (See Note 2) See table Setup, Rise Time 800ms, 20ms at full load Hold Up Time 60ms at full load Temperature Coefficient 0.04%/C (0~50C) on +5V output. PROTECTION CH.1: 5.75 ~ 6.75VDC on CH 1 Over Voltage Protection Protection Type: Hiccup mode, recovers automatically after fault condition is removed. 73 ~ 95W rated output power. Overload Protection Protection Type: Hiccup mode, recovers automatically after fault condition is removed. GENERAL SPECIFICATIONS Switching Frequency (fixed) 65KHz Efficiency (typical) See table Withstand Voltage 3KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG). All for one minute. Isolation Resistance 100M / 500VDC (input to output, input to FG, output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10C to +60C (refer to output load derating curve) Storage Temperature -20C to +85C Working Humidity (non-condensing) 20% ~ 90% RH non-condensing Storage Humidity (non-condensing) 10% ~ 95% RH Vibration 10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes. MTBF 277,200 hours min. MIL-HDBK-217 (25C) PHYSICAL SPECIFICATIONS Weight 28 oz. Dimensions 127(L) x 76(W) x 42(H) mm Warranty 2 years SAFETY & EMC Safety Standards UL60950-1, TUV EN60950-1 Approved EMI Conduction and Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A. o Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSPT65 Series Triple Output Up to 68 Watts AC/DC Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Channel 1 PSPT-65A Channel 2 Channel 3 Channel 1 PSPT-65B Channel 2 Channel 3 Channel 1 PSPT-65C Channel 2 Channel 3 Channel 1 PSPT-65D Channel 2 Channel 3 90~264 VAC (127~370 VDC) Input Voltage Output Voltage 5 VDC 12 VDC -5 VDC 5 VDC 12 VDC -12 VDC 5 VDC 15 VDC -15 VDC 5 VDC 12 VDC 24 VDC Output Rated Current Range Output Current 0.4 ~ 7A 5.5A 0.2 ~ 3.2A 0 ~ 0.7A 0.4 ~ 7A 0.2 ~ 3.2A 0 ~ 0.7A 0.4 ~ 7A 0.2 ~ 2.6A 0 ~ 0.7A 0.5 ~ 5A 0.2 ~ 4A 0.2 ~ 1.3A 2.5A 0.5A 5.5A 2.5A 0.5A 5.5A 2A 0.5A 4A 2A 1A Ripple & Noise 50mVp-p 120mVp-p 50mVp-p 50mVp-p 120mVp-p 100mVp-p 50mVp-p 120mVp-p 100mVp-p 50mVp-p 100mVp-p 200mVp-p 68W 79% 65W 77% 63.5W 77% Output Power 60W Efficiency 76% NOTES 1. All parameters not specially mentioned are measured at 230VAC input, rated load, and 25C ambient temperature. 2. Ripple & noise are measured at 20MHz using a 12" twisted pair-wire terminated with 0.1uF & 47uF capacitors in parallel. 3. Tolerance: includes set up tolerance, line regulation, and load regulation. 4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be reconfirmed that it still meets EMC directives. 5. Mounting holes M1 and M2 should be grounded for EMI purposes. BLOCK DIAGRAM fosc: 65KHz Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSPT65 Series Triple Output Up to 68 Watts AC/DC Power Supply DERATING CURVE STATIC CHARACTERISTICS (B) MECHANICAL DRAWING Unit: mm AC INPUT CONNECTOR (CN1) Pin. No Assignment 1 AC/N 2 AC/L DC OUTPUT CONNECTOR (CN2) Pin No. Assignment 1 V2 2,3 +5V 4,5 COM 6 V3 PIN 2: +5V PIN 3,4,5: COM only for PSPT-65D Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 |
Price & Availability of PSPT65
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |